MT1885/MT723 Contractor Combo Kit – MTCK1

The MTCK1 is a Contract Combo Kit that is suitable for use by all Electricians. This kit includes the MT1885 1500V DC IP67 True RMS Bluetooth Multimeter and the MT723 400A AC/DC True RMS Clamp Meter.MT1885 Features:– 6000 count with 61 Segment Bargraph- Measures DCV up to 1500V & ACV up to 1000V- Temperature measurement from -20 to 1000 C- AC & DC Micro Amps up to 10A- Capacitance to 100mF- Frequency to 10MHz- Duty Cycle- Relative mode- Automatic NCV where LCD backlight turns red- Min, Max and Data Hold- Auto Power Off- IP67 Dust and WaterproofMT1885

– DC Voltage: 600.0mV to 1500V +/- (0.5% +5)- AC Voltage: 6.000V to 1000V +/- (0.8% +4)- DC Current: 600.0uA to 10A +/- (1.0% +3)- AC Current: 600.0uA to 10A +/- (1.5% +2)- Resistance: 600.0 ohms to 60 megaohms +/- (1.5% +2)- Frequency: 9.999Hz to 9.999MHz +/- (1.2% +4)- Capacitance: 99.99nF to 100mF +/- (4.0% +5)- Temperature: -20 to 1000 C +/- (3.0% +5C)- Duty Cycle: 0.1% to 99.9% +/- (1.2% +2)- Size: 187 x 81 x 50mm- Weight: 342gMT723 Features:– CAT III 600V and CAT II 1000V- 4000 count backlit LCD display- 400A AC/DC- 1000V AC/DC- Resistance: 40 milliohms- Frequency: 10kHz- Capacitance: 100mF- Temperature: -20 to 1000 C- With 30mm diameter Cable Clamp size- INRUSH Current Measurements- VFD Variable Frequency Drive voltage value- NCV Non-Contact Voltage Detector- Built-In Flashlight- Continuity buzzer and Diode Test- Peak Mode and Data Hold function- Auto Power OffMT723

– DC Current measurement: 0.01A to 400A x 0.01A+/- (2.0% +8 Digits)- AC Current measurement: 0.01A to 400Ax 0.01A+/- (2.0% +8 Digits)- DC Voltage measurement: 1mV to 1000Vx 1mV +/- (1.0% + 3 Digits)- AC Voltage measurement: 1mV to 1000V x 1mV +/- (1.2% + 5Digits)- Resistance measurement: 0.1 ohms to 40 milliohms x 0.1 ohms +/- (1.5% + 2 Digits)- Frequency measurement: 1Hz to 100kHz x 1Hz +/- (1.0% + 5 Digits)- Capacitance: 0.01nF 99.99mF x 0.01nF +/- (3.0% + 5 Digits)- Temperature: -20 to 1000 C x 1 C +/- (3% + 3 C Digits)- Duty Cycle: 20 to 80%x 0.1 +/- (1.2% + 10 Digits)- AC Bandwidth: 2kHz- Digital Display: 4000- Overrange indication: Yes- Continuity: Yes- Diode Test: Yes- Jaw Size: 30mm- Input Impedance: greater than 10 milliohms DCV and greater than 10 milliohms VAC- Peak Hold: Yes- Data Hold: Yes- Back Light: Yes- Enclosure: Double moulded case- Low Battery Indication: Yes- Batteries: 3x AAA- Weight: 305g- Dimensions: 220 x 80 x 39mm- Safety Specs: IEC61010-1 CAT III 600V