TagTemp-USB Temperature Data Logger

Tag Temp USB is a small portable waterproof temperature logger. Its internal sensor measures local environment temperature and logs such values in an electronic memory. Logged data, or acquisitions can be easily uploaded to a PC using an USB connection where it can be later viewed and analysed in tabular and graph forms.

Logchart Software:

The configuration of the TagTemp is done by the LogChart software for Windows. Data is transmitted to the TagTemp through the PC’s USB port. The Parameter Configuration window in LogChart lets you configure the following parameters:

– Logging session title
– Channel setup – name, type, limits, scaling
– start log options – immediately or timed
– log rate
– logging options – stop when full, set number of readings or roll-over

After the logging session is complete, data can then be downloaded again by LogChart and displayed in table and chart formats. Data files can then be saved as ASCII text files for importation into common spreadsheets. It is also possible to monitor data in real-time.

Specifications

– Measure Range: Temperature: +/- 20.0 C to 70.0 C.
– Accuracy: +- 0.1 C at 25 C; +- 1 C max. along the entire measured range.
– Measurement Resolutions (Temperature): 0.1 C.
– Memory capacity: 32.000 (32 k) logs.
– Measurement Interval: 5 seconds min; 18 hours max.
– Supply: 3.0 V lithium battery (CR2032), built-in
– Estimated autonomy (More than 400 days): Sampling rate of 1 minute.
– Estimated autonomy (More than 500 days): Sampling rate of 30 minutes.
– Operating temperature: From -20 C to 70 C
– Case: PC-ABS
– Protection: up to IP67 degree of protection
– Dimensions: 55 x 37,5 x 15 mm
– Equipment -PC data transfer time: Proportional to the number of records. 20 seconds to 32,000 records
– PC Interface: Micro-USB

LogChart ll software operation environment:

– Configurator software for Windows 8, 7 and XP
– Menus in Portuguese, English or Spanish
– Sets up, reads and displays data on the screen.