Vibration Meter Data Logger 200G – IC-E-200G

The Vibration Meter Data Logger – Vibration Sentry E-200g is a new generation of smart data logger that can record acceleration, inclination, vibration and impacts. It includes a 3-axis +-200g MEMS accelerometer, an accurate date/time clock and a non-volatile 128 Mb recording memory. Depending on the settings it can record vibration signals and/or RMS levels for months. Its very small size allows it to be attached to or embedded within the monitored equipment.

The Vibration Meter Data Logger – Vibration Sentry E-200g is an all digital design with an integrated oscilloscope function that can show the vibration signals in real time, and an integrated spectral analyzer function that shows a 512-line spectrum in real time. It is self-calibrated using the earth?s gravity as a reference. An auto-rec feature allows the instrument to stay dormant for months, only recording when the acceleration signals are detected over an adjustable threshold.
Features:
– A visual alarm on acceleration threshold.- A timer that allows the instrument to start the Record or the AutoRec mode at a specified date and time.- A new AutoRec implementation that performs the triggering in software with much greater precision than on the RT model. The new trigger provides at least 80 ms of pre-trig data.- Management of Time Zones at the instrument level.- Settings are retained through a reset.- 3-Axis integral MEMS accelerometer- Measures and records:- Raw acceleration and shock signals- Acceleration statistics- Vibration levels- Inclinations- All-digital design.- Integrated oscilloscope function that can show the vibration signals in real time.- Allows the observation of recorded data while the recording is ongoing.- Works standalone, or USB connected for setup and data transfer to PC.- Long life internal rechargeable battery that recharges from USB.- Self-calibrated using the earth?s gravity as a reference.- Observes and records 100% of the acceleration signals (no missed samples).- Editable individual custom ID for easier instrument management.- Completely sealed weatherproof enclosure.- LabVIEW driver available

Specifications

– Number of axes: 3- Acceleration Sensor: MEMS 3-axes- Dynamic Range: +-200g- Bandwidth High Limit: Adjustable up to 1.6 kHz (@ 3.2 kHz Sampling Rate)- Bandwidth Low Limit: DC (High-Pass Filter Bypass), Adjustable from 10 mHz to Fs/2 (High-Pass Filter On)- Noise-Floor X-Y Axes (Typical): -30 dBg (31 mg RMS) @ 100 Hz Sampling Rate, -18 dBg (125 mg RMS) @ 3.2 kHz sampling Rate- Connectivity: USB- Measurements: Raw Acceleration (g or m/s2), Min, Max and Avg Acceleration values (g or m/s2), Inclinations, Min, Max and Avg RMS Vibration level (linear or dB, g or m/s2)- Duty Rate of Signal Capture: 100% ? No Missed Samples- Spectral Display: 3-Axes 512-point Power Spectrum – dB or Lin Scale- Modes of Operation: Idle (Micro-Power), USB-Connected (Active), Recording, Auto-Rec (Idle when no activity / – Recording while activity is present)- Calibration: Self-Calibration using the earth’s gravity as a reference- Battery Type: Integral Li-Poly ? USB-Rechargeable- Recharge Time: 2 h 30 (Typical)- Battery Autonomy (Full-Charge): Up to one year while in Idle, 300 H to 6000 H while recording, depending on settings- Battery Life: > 300 Charge/Discharge Cycles- Temperature Range: -20 C to 60 C (-4 F to 140 F)- Recording Memory: Non-Volatile Flash Memory- Recording/Erasure Cycles: Greater than 100 000
– Data Retention: Greater than 20 YearsDimensions: 7.62 x 3.94 x 2.06 cm, (3 x 1.55 x 0.81 inches)Construction: Integrally Potted Weather-Proof ABS Enclosure